Ortofon Cadenza Black Cartridge
Usually ready in 2-4 days —
Ortofon Cadenza Black Cartridge
Ortofon Cadenza Black Cartridge
The Cadenza Black model is using a Nude Shibata stylus with a boron cantilever.
The effective mass of the stylus/cantilever system is extremely low due to the use of a very thin boron rod. This material is extremely stiff and even more lightweight than aluminium.
It also uses the WRD (wide range damping system), controlling the high and low frequency damping separately.
Cadenza Black is optimised for an amazing tonal neutrality, dynamics, and purity of sound. It is high-performing in areas like detail, consistency, and sound staging.
Technical data |
|
| Output voltage at 1000 Hz, 5 cm/sec. | 0,3 mV |
| Channel balance at 1 kHz | |
| Channel separation at 1 kHz | > 27 dB |
| Channel separation at 15 kHz | > 20 dB |
| Frequency range at -3 dB | 20 - 60.000 Hz |
| Frequency response: 20 Hz - 20 kHz | +1,5/0 |
| Tracking ability at 315Hz at recommended tracking force *) | 90 m |
| Compliance, dynamic, lateral | 16 m/mN |
| Stylus type | Nude Shibata, Boron cantilever |
| Stylus tip radius | r/R 6/50 m |
| Tracking force range | 2,0-2,5 g (20-25 mN) |
| Tracking force, recommended | 2,3 g (23 mN) |
| Tracking angle | 20 |
| Internal impedance, DC resistance | 5 Ohm |
| Recommended load impedance | > 10 Ohm |
| Cartridge body material | Stainless steel Aluminium |
| Cartridge colour | Black/Black |
| Cartridge weight | 10,7 gram |
753-755 Nicholson Street
Carlton North VIC 3054
Australia
0394195070
check_circle Pickup available, usually ready in 2-4 days