Ortofon Cadenza Black Cartridge
Ortofon Cadenza Black Cartridge
Regular price
$5,199.00 AUD
Regular price
$0.00 AUD
Sale price
$5,199.00 AUD
Unit price
per
GSTincluded.
Shipping Policy
Couldn't load pickup availability
AFTER PAY
ZIP PAY
LAY BUY
- 755 NICHOLSON ST CARLTON NORTH
- Full Aussie Manufact. Warranty
- Free Shipping over $500
Ortofon Cadenza Black Cartridge
The Cadenza Black model is using a Nude Shibata stylus with a boron cantilever.
The effective mass of the stylus/cantilever system is extremely low due to the use of a very thin boron rod. This material is extremely stiff and even more lightweight than aluminium.
It also uses the WRD (Wide Range Damping-system), controlling the high and low frequency damping separately.
Cadenza Black is optimised for an amazing tonal neutrality, dynamics and purity of sound. It is high performing on areas like detail, consistency and sound staging.
Technical data |
|
| Output voltage at 1000 Hz, 5cm/sec. | 0,3 mV |
| Channel balance at 1 kHz | |
| Channel separation at 1 kHz | > 27 dB |
| Channel separation at 15 kHz | > 20 dB |
| Frequency range at - 3dB | 20 - 60.000 Hz |
| Frequency response 20 Hz - 20 kHz | +1,5/0 |
| Tracking ability at 315Hz at recommended tracking force *) | 90 m |
| Compliance, dynamic, lateral | 16 m/mN |
| Stylus type | Nude Shibata, Boron cantilever |
| Stylus tip radius | r/R 6/50 m |
| Tracking force range | 2,0-2,5 g (20-25 mN) |
| Tracking force, recommended | 2,3 g (23 mN) |
| Tracking angle | 20 |
| Internal impedance, DC resistance | 5 Ohm |
| Recommended load impedance | > 10 Ohm |
| Cartridge body material | Stainless steel Aluminium |
| Cartridge colour | Black/Black |
| Cartridge weight | 10,7 gram |
