Ortofon 2MR Black Cartridge. Front and side image

Ortofon 2MR Black Cartridge. Image shows pins

Ortofon 2MR Black (suits Rega turntables) Cartridge

Name: Ortofon 2MR Black (suits Rega turntables) Cartridge
Brand: Ortofon
SKU: ORT-2MRXXX-MM-CTG-BLK
Price: 999.00 AUD
Availability: InStock

$999.00 AUD $1,099.00 AUD

Product variants

"WE ASSURE YOU THAT ALL OUR PRODUCTS ARE 100% GENUINE AND COME WITH FULL LOCAL WARRANTY"

Ortofon 2MR Black

For an optimised fit on low-profile turntables & perfectly suited to Rega turntables

The Ortofon 2MR series is designed with a newly developed cartridge housing for optimised fitting on low-profile turntables. With its ultra-slim 3mm height reduction, seamless integration is guaranteed. The cartridge's slimline body eliminates the need for spacers or modifications, ensuring quick, easy mounting with just two screws.

Experience unmatched compatibility with all 2M styli and revel in the high-performance motor system featuring quad coils and split pole pins, exclusive to genuine Ortofon cartridges

Accuracy level

The 2M Black is the flagship of the series and it lives up to this with flying colours. You can hear every little detail in the music from every part of the spectrum. Just the way the artist intended.

With the 2M Black, you will not only hear the music, but you will sense the presence of the artist in the room while listening to your favourite records

Stylus

The 2M Black is bestowed with a Shibata diamond that gives it contact with the vinyl's groove like nothing else. The slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the most high frequency groove information

Product Features

Newly developed low form factor cartridge housing within the famous 2M series:

Slimline cartridge body - Effectively eliminates the need for tonearm spacers, shims or modifications
100% compatibility with the 2M styli - All Ortofon 2M styli fits on all 2MR cartridge models
Standard half inch mounting - Quick and easy mounting on the tonearms with just two screws
A complete series ranging from Mono to Premium: 2MR Red to High-end: 2MR Black LVB 250

2MR Black:

Nude Shibata diamond on an aluminium cantilever with a High-end Ortofon rubber damper
Quad coil motor system with four sliver-plated copper coils and four split pole pins
With 2MR Black you can hear every little detail in the music from every part of the spectrum.

Technical Specifications

Output voltage at 1000 Hz, 5cm/sec. - 5 mV
Channel balance at 1 kHz - 1 dB
Channel separation at 1 kHz - 26 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force - 80 µm
Compliance, dynamic, lateral - 22 µm/mN
Stylus type - Nude Shibata
Stylus tip radius - r/R 6/50 µm
Tracking force range - 1.4-1.7 g (14-17 mN)
Tracking force, recommended - 1.5 g (15 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1.2 kOhm
Internal inductance - 630 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Black
2MR cartridge weight - 6 g
2M and 2M Verso cartridges weight - 7.2 g
2M Pre-mounted cartridge weight - 16.7 g

*Reprint from manufacturers website.

Pairs well with

Ortofon 2MR Black (suits Rega turntables) Cartridge

$999.00 AUD $1,099.00 AUD