Canor AI 1.20 Integrated Solid-State Amplifier
"WE ASSURE YOU THAT ALL OUR PRODUCTS ARE 100% GENUINE AND COME WITH FULL LOCAL WARRANTY"
Introducing the A1 1.20
The Premium Line Integrated Solid-State Amplifier from Canor
CANOR AI 1.20 is an integrated solid-state amplifier in pure class-A up to 50 W per channel with a relay attenuator with two standalone blocks for each channel.
Highlights
- Operates in a pure class A
- 264 000 uF of total filtering capacitance
- Possibility to create a monoblock connection of two units.
Heat Disposal
Canor used a special copper plate for heat dissipation, which is installed on the heatsink and the power transistors are installed directly on the given copper plate
Dual-Mono Connection
Dual-mono connection – each channel has its own power transformer. Power transformers are located in separate parts of the device.
Amplifier design
A shielded tunnel passes through the centre of the AI 1.20 amplifier, in which filters with nano crystalline coils are located. In addition, the input circuits are equipped with low-noise j-p transistors.
Monoblock Connection
For even better performance and sound, it is possible to connect AI 1.20 as monoblocks using a data cable. One unit becomes the “master” unit and the other the “slave”.
This is the so-called bridge connection of two amplifiers (a fully symmetrical connection).
Product Features
- An integrated solid-state amplifier in pure class-A up to 50 W per channel
- Relay attenuator with two standalone blocks for each channel
- PCB’s utilise Canor's premium CMT™ technology (CANOR® PCB Milling Technology), it is the way we mill printed circuit boards
- CMT™ technology originated in a long-standing endeavour to improve the sonic performance of our products
- Power supply units with filtered out interfering signals from the mains supply
- Interference-rejection and as small as possible leakage field ensure custom-wound toroidal transformers
- 264 000 uF of filtering capacitance simulates a nearly stabilised supply voltage
- Option of synchronous control enables the use of two amplifiers in a monoblock mode without the need of using an extra preamplifier and that is a Master/Slave mode with an output power of 100W per channel
Technical Specifications
Stereo Output Power
2 x 50 W / 4 Ω
2 x 30 W / 8 Ω
Monoblock Output Power
1 x 130 W / 4 Ω
1 x 100 W / 8 Ω
Gain
30 dB
Frequency Range
20 – 25 000 Hz ± 0.5 dB / 5 W
Input Impedance
30 kΩ
Inputs
5 x RCA
2 x XLR (XLR active in monoblock connection only)
Total Harmonic Distortion
<0.0 9% / 1 kHz, 5 W
Signal-to-Noise Ratio
> 90 dB
Signal-to-Noise Ratio Monoblock
> 100 dB
Filtration Capacity
132 000uF / 35V (per channel)
Damping factor at 4 Ω load at the output
250 (based on measured output impedance)
Damping factor at 8 Ω load at the output
500 (based on measured output impedance)
Power
230 V / 50 Hz / 375 VA
Dimensions (w x h x d)
435 x 170 x 485 mm
Weight (net)
28 Kg
*This information has been obtained from Manufacturers website. We advise that Features & Specifications are subject change from Manufacturer without notice.
E&OE
Pairs well with
Canor AI 1.20 Integrated Solid-State Amplifier
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
Contact Us
Use this text to answer questions in as much detail as possible for your customers.