Audio Technica AT-VM95E Dual Moving Magnet Cartridge
$75.00 $79.95
AT-VM95E
Dual Moving Magnet Cartridge
This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
- VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
- Aluminium cantilever
- Specially wound coils increase output voltage
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
- Compatible with any AT-VMN95 replacement stylus
| Frequency Response |
20-22,000 Hz |
| Channel Separation |
20 (dB at 1 kHz) |
| Vertical Tracking Force |
1.8-2.2g (2.0g standard) |
| Stylus Construction |
Bonded round shank |
| Recommended Load Impedance |
47,000 ohms |
| Output |
4.0 mV (1 kHz, 5 cm/sec.) |
| Channel Balance |
2.0 dB (1 kHz) |
| Stylus Shape |
0.3 x 0.7 mil elliptical |
| Cantilever |
Aluminium pipe |
| Mount |
Half-inch |
| Replacement Stylus |
AT-VMN95E |
| Coil Impedance |
3.3 k ohms (1 kHz) |
| DC Resistance |
485 ohms |
| Load Capacitance |
100 to 200 pF |
| Coil Inductance |
550 mH (1 kHz) |
| Vertical Tracking Angle |
23° |
| Dimensions |
17.2mm H × 18.9mm W × 28.3mm D |
| Weight |
6.1g |
| Accessories Included |
Two 11mm installation screws, two 8mm installation screws, two washers |
