Skip to content
NOW CLOSED SUNDAYS (03) 9419 5070
NOW CLOSED SUNDAYS (03) 9419 5070

Audio Technica AT-OC9XEN Moving Coil Phono Cartridge

Save $34.00 Save $34.00
Original price $699.00
Original price $699.00 - Original price $699.00
Original price $699.00
Current price $665.00
$665.00 - $665.00
Current price $665.00


Moving Coil Phono Cartridge

The AT-OC9XEN is a premium moving coil phono cartridge with a 0.3 x 0.7 mil Elliptical Nude stylus.

The OC9X range features a new Dual Moving Coil structure, which enables the audio information in the record grooves to be separated to the left and right channels with pinpoint accuracy. This improved channel separation results in a more precise stereo image and wider frequency response. The moving coil wires in all OC9X Series cartridges are made from PCOCC (Pure Copper by Ohno Continuous Casting), for optimum signal purity.

The AT-OC9XEN’s transducer engine is mounted onto a rigid aluminium body to help reduce unwanted internal vibrations and maintain sonic clarity. The cartridge bodies are pre-threaded, enabling them to be easily mounted to a headshell or tonearm with just two screws (no mounting nuts for the screws are required). Each OC9X Series cartridge is supplied with mounting hardware, a stylus brush and other accessories.

Moving Coil Phono Cartridge

  • 0.3 x 0.7 mil Elliptical Nude stylus
  •  Made from PCOCC (Pure Copper by Ohno Continuous for optimum signal purity
  •  Aluminium body and cantilever to help reduce unwanted vibrations and maintain sonic clarity
  •  Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required

Dual Moving Coil

Body Material


Mounting Feature

Threaded inserts

Frequency Response

20 to 30,000 Hz

Channel Separation

25 dB (1 kHz)

Output Channel Balance

1.5 dB (1 kHz)

Output Voltage

0.35 mV (at 1 kHz, 5 cm/sec)

Vertical Tracking Angle

20 degrees

Vertical Tracking Force Range

1.8 to 2.2 g (standard 2.0 g)

Stylus Shape

Elliptical Nude

Stylus Curvature Radius

0.3 x 0.7 mil

Stylus Construction

Nude square shank


Aluminium pipe

Static Compliance

20 x 10^(–6cm) / dyne

Dynamic Compliance

9 x 10^(–6 cm) / dyne (100 Hz)

Wire Used for Coil


Terminal Pins


Recommended Load Impedance

Min 100 Ohm

Coil Impedance

12 Ohm

DC Resistance

12 Ohm

Coil Inductance

25 uH (1 kHz)

Cartridge Weight

7.6 g


17.3 (H) x 16.8 (W) x 25.7 (L) mm


1/2” centers

Accessories Included

non magnetic screw driver; 1 brush; 2 washers; 4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm; 1 plastic protector