australia's largest turntable store

Luxman D-06u SACD Player

Luxman D-06u SACD Player

D-06u succeeding the magnificent configuration of our flagship model, D-08u, is a CD/SACD player that plays back file sound sources by connecting to a Windows or Mac PC via USB. LxDTM*, Luxman's original disc drive mechanism with overwhelming rigidity and high reading accuracy is provided to stabilize the rotation system at disc media playback, and the latest high sound quality configuration including 32-bit digital signal processor is provided in the digital circuit.The leading-edge USB D/A converter is provided to support 384 kHz/32-bit PCM and 5.64 MHz DSD, for-seeing the further progress of file sound sources. With the enhanced charm as "Digital Media Player", D-06u proposes a new style to play back the music.
* LxDTM is an abbreviation for Luxman original Disc Transport Mechanism.


Advanced digital circuit

D-06u is equipped with dual-configured (monaural mode) PCM1792A D/A converter that has achieved ultra-high S/N ratio and dynamic range (theoretical value: 132 dB) manufactured by Texas Instruments Incorporated to support playback of not only CDs and SACDs but also file sound sources of up to 384 kHz/32-bit PCM data and DSD data (2.82 M, 5.64 MHz) by connecting a Windows or Mac PC via USB. TAS3152, the latest 32-bit digital signal processor manufactured by Texas Instruments Incorporated, upsamples PCM signals to up to 384 kHz to polish the sound quality. Thanks to the function of the chip mentioned above, a digital filter is selectable from 3 types for PCM signals, and a tone is selectable from 2 types made by the DAC chip-embedded analog FIR filter for DSD signals. As countermeasures against jitter, the jitter of USB signals is reduced by the dedicated DSP via asynchronous communication, the jitter of CD or S/PDIF signals is reduced by the embedded DAIR high-precision clock, and the jitter of SACD signals is reduced by the dedicated jitter reduction chip. In addition, the low phase noise clock module improves the accuracy of the entire signal transmission.


Balanced amplifier circuit

A high-grade analog amplification circuit is necessary to convert playback signals that have been precisely read by the drive mechanism and sophisticatedly digitized into analog signals through the highly precise D/A converter and produce high-quality audio signals finally by the player. D-06u makes the differential output of the D/A converter, PCM1792A, operating at the monaural mode reduce the impedance by the high sound quality buffer circuit with thoroughly balanced configuration (identically configured amplifier x 4 units). This unit powerfully drives the next stage components such as a pre-main amplifier and a control amplifier. The high-inertia power supply system through the regulators and block capacitor with large capacity allocated for each circuit powerfully supports stable operation with sufficient power from Luxman's traditional audio-specific power transformer.


Wide variety of digital input terminals

PCM digital input terminals consisting of 1 channel of coaxial line capable of up to 192 kHz/24 bits and 1 channel of optical line as well as USB port ready for DSD/PCM signals on the rear panel. This unit, therefore, can be a digital center connecting to various digital sources.


Original mechanism LxDTM

D-06u is equipped with LxDTM, LUXMAN original high-rigidity disc drive mechanism. The box chassis structure that covers the entire base section storing the traverse allows external vibrations to be rigidly blocked out and enables reading digital signals with sufficient accuracy. This mechanism has adopted an asymmetrical left-sided mechanism layout after careful consideration of sufficient space for voluminous analog circuit, ideal flow for all kinds of signals, oscillatory path, and weight balance without the use of general type centered mechanism structure. Thick die-cast aluminum is used for the loader on which a disc is put. Use of this loader can fundamentally eliminates unnecessary resonance and vibration that are applied to the loader and provide quiet and smooth operation.



Format 2-channel Super Audio CD, CD
Power supply 230 V ~ (50 Hz)
Power consumption 29 W / 1 W (at standby)
Weight 15.7 kg (main unit only)
Max. external dimensions 440 (W) x 133 (H) x 410 (D) mm
Ambient operating temperature / Ambient operating humidity +5 C to +35 C / 5 % to 85 % (non condensing)
Output voltage / output impedance:
UNBALANCE terminal (RCA terminal) 2.5 Vrms/300ë©
BALANCE terminal (XLR terminal) 2.5 Vrms/600ë©
For SACD/DSD (‰ÛÒ0.5 dB) 2.35 Vrms
Frequency response:
CD, SACD 5 Hz to 20 kHz (+0, ‰ÛÒ0.5 dB)
BALANCE terminal (XLR terminal) 2.5 Vrms/600ë©
For SACD/DSD (‰ÛÒ0.5 dB) 2.35 Vrms
Total harmonic distortion:
CD 0.0015 %
SACD 0.0011 %
COAX/OPT 0.0009 %
USB 0.0009 %
S/N ratio:
CD 122dB
SACD 104dB
USB 123dB
Dynamic range:
CD 100 dB
SACD 104 dB
USB 123 dB
Channel separation:
CD 110 dB
SACD 103 dB
USB 124 dB
Coaxial digital input: 0.2 to 2.5 Vp-p
Optical digital input: ‰ÛÒ14.5 to ‰ÛÒ21 dBm
USB input: (Applicable OS) Microsoft Windows Vista or later, Mac OS X10.7 or later
Sampling Frequency:
OPT/COAX 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz 96 kHz, 176.4 kHz, 192 kHz
USB input 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz
96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz 384 kHz (16 bit, 24 bit, 32 bit)
2.8224 MHz, 5.6448 MHz (1 bit)
Coaxial digital output: RCA terminal 0.5 Vp-p/75ë©
Optical digital output: Optical digital terminal ‰ÛÒ15 to ‰ÛÒ21 dBm

* Reprint from Manufacturer's website

Related Items